Manufacture of special felts

One century of history...

Since 1923, above all, we aspire to be the privileged partner of industrial companies and dealers, providing a reliable service and irreprochable quality.

RANGE OF FINISHES FOR HATS AND FABRICS

We create and develop the products you need.

tableau apprets textiles

AQUAFIX

Aquafix is a colourless, transparent finish that gives a more or less firm feel depending on its concentration.

It is very efficient when used on the following: straw, felt, merinos, synthetic fabrics, nylon, Tergal (French polyester), tri-acetate, acetate, crylor, as well as on cellulosic fabrics, and does not diminish their natural gloss.

Aquafix comes in the form of a viscous liquid that is soluble in hot or cold water.

Packaging

  • R 135 is packaged in 5, 30 and 100-litre packs
  • All our shipments are ex works from our Rouen plant.

BSL 41 LCA

BSL 41 LCA is a flame-retardant, fire-resistant finish

BSL 41 LCA works on all fabrics

BSL 41 LCA is particularly recommended as a topical treatment local for stopping combustion because of its high molecular weight

BSL 41 LCA has a very high binding power, which gives it excellent adhesion on all supports (including polypropylene thread).

BSL 41 LCA gives a glossy and transparent film and a flexibility obtained by internal plasticising.

Packaging

  • BSL 41 LCA is packaged in 5, 30 and 100-litre packs
  • All our shipments are ex works from our Rouen plant.

CERAL A 211

Essential properties of CERAL A 211 :

  1. CERAL A 211 has a very high binding power that makes it very resistant to yellowing and gives it a excellent adhesion to a very wide range of supports.
  2. CERAL A 211 gives a glossy and transparent film and a flexibility obtained by internal plasticising, particularly on ribbons, elastic fabrics, etc.
  3. CERAL A 211 is an excellent stiffener used on tulle and lace

Packaging

  • CERAL A 211 is packaged in 100-litre drums
  • All our shipments are ex works from our Rouen plant.

EMULSIONS AL / AL 50

Essential properties :

  1. AL / AL 50 EMULSIONS have a very high binding power that gives them excellent adhesion on all types of supports
  2. AL / AL 50 EMULSIONS are very resistant to yellowing
  3. AL / AL 50 EMULSIONS give a glossy, transparent film that is rigid, but not brittle.

Packaging

  • AL / AL 50 EMULSIONS are packaged in 5, 30 and 100-litre packs
  • All our shipments are ex works from our Rouen plant.

R 212

R 212 is a concentrated colourless, transparent finish that is used to give a firm feel.

R 212 is very effective on straw, felt, merinos, synthetic fabrics, nylon, Tergal (French polyester), tri-acetate, acetate, crylor, as well as on cellulosic fabrics, and does not diminish their natural gloss.

R212 comes in the form of a viscous liquid that is soluble in hot or cold water.

Packaging

  • R 212 is packaged in 5, 30 and 100-litre packs
  • All our shipments are ex works from our Rouen plant.

PERMAFIX 50

Specific properties :

  1. PERMAFIX 50 has a very high penetrating power thanks to its liquid consistency.
  2. PERMAFIX 50 penetrates deep into tight fabrics and gives them a uniform finish.
  3. PERMAFIX 50 has a very high chemical resistance and is very impermeable to water, grease and oil.
  4. Once it is cross-linked, PERMAFIX 50 has a very high mechanical resistance over time, that is even higher than that of vinyl resins.
  5. PERMAFIX 50 has non-fading films.

Top

© Ets Laoureux | crédit | mentions légales